A non-pigmented, clear, polymer-based, highly elastomeric primer.

Its self-leveling ability helps block capillaries in concrete structures.

Can travel through and seal the hairline cracks.

Enhance paint Life.

Controls Seepage.

Protects Steel Corrosion.

Used for the waterproofing of retaining walls, parapet, underground roofs, Wardrobes, limestone, gutka tiles and all wet areas, such as washrooms, laundry area, water tanks.

A single-component elastomeric polymer-modified pigmented
coating.

Durable, flexible and has a high level of resistance to weathering
agents like UV rays, sunlight, frost, dampness and sulfate salts.

Used with Graphene primer and waterproofing to improve
thickness of waterproofing layer.

Effective barrier to the water-borne salts and the atmospheric
pressures at D.P.C. levels.

Used on all concrete structures, roofs and basements.

A synthetic co-polymeric plasticized admixture.

Used with white cement as the cementitious tile grout.

Greater abrasion resistance, increases flexural strength and flexibility.

Reduces water permeability.

Available in all the desired colours.

A two-pack Polymer Modified Cementitious Waterproofing slurry and protective coating.

Used with the tile grout cement.

Used for interior and exterior waterproofing and damp-proofing of concrete, brickwork, block works, water tanks, bathrooms, toilets, etc.

A blackish-grey single-component, pre-packed tiling adhesive.

It has several polymer admixtures.

Non Shrink & Self Curing.

Comes with a solution for extra strong adhesion and waterproofing.

A good bonding and consistency in different climates.

It is used as an adhesive for all types of tiles.

A two-component compound.

A tough adherent.

High abrasion-resistant.

Used on floors and walls where cement and plaster are liable to be attacked by high humidity, machine fumes, etc.

Inhibits the growth of bacteria on surface.

A fast-curing and multi-purpose injectable chemical anchor
for threaded bars and reinforcing bars.

Highly acid and alkali-resistant

Thermal and moisture-tolerant.

Expansion-resistant.

Used for the reinforcement of steel and any bolt structures, highways, bridges, water conservancy projects, and advertisement boards.

A carboxylated styrene butadiene copolymer latex admixture.

An adhesive for cement bond coats, mortars, and concrete.

Improves bond strength and chemical resistance.

It has high flexure, strength, adhesion, and impermeability.

Improves impact resistance of concrete.

Prevents the loss of moisture content from concrete.

Helps in the development of full concrete strength.

Forms a membrane on the applied surface.

Forms a membrane on the applied surface.

Suitable for surfaces expose to sunlight and wind.

Used on pavements, structures, runways, bridges, decks, canal linings, dams, columns, beams, slabs and all concrete structures.

Can be tested under ASTM C 309.

A milky white liquid.

Higher polymeric molecular self-leveling dispersion.

Creates an impermeable barrier.

Blocks capillaries and pores in cement and mortar.

Prevents moisture and salts from entering the concrete and plaster.

Highly Plasticised, modified with high carboxylate structure.

Enhances the self leveling of concrete and mortar.

High structural polymers enhance the max strength of RCC and Mortar.

Used as concrete admixture in all types of concrete mix i.e. Rafts, Columns, beams, slabs, bridges etc.